Standard kitchen faucet height is 15 to 18 inches, reach is 8 to 10 inches.
- Hole spacing is typically 4 inches or 8 inches, or a single hole.
- Measure your sink depth and clearance to ensure a proper fit.
What Are the Standard Dimensions of a Kitchen Faucet?
Standard kitchen faucets vary in height, reach, and spout clearance. Typical heights range from 12 to 20 inches, with 15 to 18 inches being most common. Reach, the distance from the base to the spout outlet, usually spans 8 to 10 inches. Spout clearance, the vertical gap above the sink, is often 6 to 8 inches. These dimensions fit most residential sinks.
What Is the Standard Faucet Hole Spacing?
Faucet hole spacing is measured from the center of the leftmost hole to the center of the rightmost. Standard spacing is 4 inches or 8 inches. Four-inch centersets are common in older or smaller sinks. Eight-inch centersets are typical for widespread faucets. Many modern faucets use a single hole, which requires no spacing measurement.
How to Measure for a New Kitchen Faucet
First, measure the distance between the outer edges of the outermost holes. Then subtract half the diameter of each hole to get the center-to-center distance. Also measure the depth of your sink from the rim to the bottom. This helps ensure the faucet's reach and height will clear the sink. Finally, check the clearance above the sink, including any window sills or cabinets.
Standard Sizes for Different Kitchen Setups
For a standard double-basin sink, a faucet with a 10-inch reach works well. A single-basin deep sink may need a taller faucet, up to 20 inches, to reach the bottom. Commercial-style faucets often have a higher arc, around 18 inches, and a longer reach. For a bar or prep sink, a compact faucet with a 4-inch centerset is common.
Are There Non-Standard Faucet Sizes?
Yes, some faucets are designed for specific sinks or installations. Wall-mounted faucets have different dimensions, as they attach to the wall. Pot fillers are typically shorter and have a swing arm. Commercial or restaurant faucets may have a 10-inch or 12-inch centerset. Always measure your sink and existing holes before purchasing.